Press Sitemap

Dimplex / Heat pumps / Air-to-Water / Outdoor installation


High-efficiency air-to-water heat pump with two performance levels

Is NO LONGER updated and is NO LONGER in the range since: 01.03.2018
Successor model / alternative: LA 60TU-2
  SG Ready

  • Flexible for use in building renovations or new builds.
Particularly quiet operation thanks to bionically-formed owls wing fan blades and a highly sound-proofed compressor housing Efficient operation provides high seasonal performance factors and low operating costs Two performance levels for high coefficients of performance (COPs) in full-load and partial-load operation
  • Hydraulic connection of the heat pump optionally possible at the side or at the bottom.


Technical data

High-efficiency air-to-water heat pump with two performance levels
Order reference LA 60TU
Heat pump code1007
Casing colourWhite aluminium (similar to RAL 9006)
Max. flow temperature65 °C
Lower operating limit heat source (heating operation) / Upper operating limit heat source (heating operation)-22 to 35 °C
Heat output A-7/W35 / COP A-7/W35*21,2 kW / 3,0
Heat output max. A-7/W35 / COP A-7/W35*39,2 kW / 2,9
Heat output A2/W35 / COP A2/W35*26,4 kW / 3,7
Heat output max. A2/W35 / COP A2/W35*50,0 kW / 3,6
Heat output A7/W35 / COP A7/W35*31,9 kW / 4,3
Heat output max. A7/W35 / COP A7/W35*60,1 kW / 4,1
Heat output A10/W35 / COP A10/W35*33,6 kW / 4,4
Heat output max. A10/W35 / COP A10/W35*64,6 kW / 4,2
Nominal power consumption according to EN 14511 at A2/W3514,9 kW
Nominal power consumption A7/W3515 kW
Sound power level74 dB (A)
Sound pressure level in 10 m50 dB (A)
Refrigerant / Amount of refrigerantR417A / 20,9 kg
Max. heating water flow rate / Pressure drop10,4 m³/h / 8300 Pa
Heat source flow (min.)14000 m³/h
Dimensions (W x H x D)**1900 x 2300 x 1000 mm
Weight915 kg
Rated voltage3/N/PE ~400 V, 50 Hz
Starting current78 A
Fuse protection***Z 50 A
Type of defrostingReverse circulation
Connection heating2 inch

*The flow temperatures that can be achieved depending on the heat source temperature can be derived from the operating limits diagram.

**Please note that additional space is required for pipe connections, operation and maintenance.

***Die Absicherung ist als allpolige Trennvorrichtung auszuführen (gemeinsame Abschaltung aller Phasen)!

Documents and downloads

Data sheetProduct data sheet with system accessories» via e-mail
Instruction for useInstruction for use» via e-mail
Operating instructions for users for the heat pump managerOperating instructions for users for the heat pump manager» via e-mail
Installation guide for Heat Pump ManagerInstallation guide for Heat Pump Manager» via e-mail
Operating instructions for installers for the heat pump managerOperating instructions for installers for the heat pump manager» via e-mail
Product informationProduct information» via e-mail
Equipment dataEquipment data» via e-mail
Foundation planningFoundation planning» via e-mail
Declaration of conformityDeclaration of conformity» via e-mail
Recommend this page!  Print Print
Up Up
» Login